4-1/2" (114 mm) Vacuum Cup
9" (229 mm) Long Clamping Bar
Bar Adjusts 5-3/4" (146 mm) Side-to-Side
Two Threaded Clamp Knobs
The CRL Third-Hand Power Clamp is perfect for holding parts in place during
curing or bonding projects. Attach the pump-style vacuum cup to a clean, flat
surface and swing the arm into position so one threaded finger centers over the
part to be clamped. Screw the clamping finger down until contacting the part.
Finally, screw down the finger on the opposite end of the bar to apply
additional pressure straight down on the part being worked. This is the perfect
solution to clamping shower door hardware into position while UV adhesive cures.
It also eliminates the possibility of parts shifting or twisting away from
desired locations. It is also useful for holding automotive moldings, door and
window trim, or any other object you would normally secure in place with masking
tape. The 4-1/2" (114 mm) diameter vacuum cup features a red safety indicator
line to warn of vacuum loss. Finger tabs on the side ofthe cup allow quick
release of vacuum pressure.